Amazon and LEGO Shop@Home are now selling the DC Super Heroes Collectible minifigures. A couple of things you should know:
Amazon has a purchase limit of 27 per order. Don’t know how they came up with that number. LEGO will sell you 50 at a time which is lame because there’s 60 in a box so why not up the limit to 60 so people can just get a whole, unopened box? You might be able to call them or walk into a store and see what they can do for you though if you’re a box-buying kind of person.
Price has gone up to $4.99 instead of the usual $3.99 that we’ve been used to with previous CMF lines.
The individual bags are larger, and the caped figures come double-bagged so doing the feelsies test to figure out what you have is made slightly more difficult but not impossible.
There are 16 figures to collect. Here’s a list: Aquaman, Batman, Bat-Mite, BUMBLEBEE, Cyborg, The Flash, Green Lantern, Metamorpho, Mister Miracle, Sinestro, Wonder Woman, Superman, The Joker, Huntress, The Cheetah, Stargirl.
Walmart has a third-party seller that has some of the individual figures for sale for more than double the cost of a single blind pack. Still, if that’s more up your alley, take a look at what’s listed.
As usual with these kinds of posts, FBTB may make a small commission from any sales generated from clickthroughs.
I received the 40433 1989 Batmobile – Limited Edition promo set last week and finally had a chance to build it. It does enough to capture the look and feel of source material, but it doesn’t quite hit it out of the park.
The wing fins are not curved like the source material, and they don’t flow into the curve of the body.
The inclusion of the pop-up miniguns is a bit curious. It would have been better to include some additional parts to swap out between the guns and some smooth tiles.
The front is another area where things could have been smoother. The fenders flow right into the front of the car on the source, but here there’s a noticeable step. If I had the time and resources, I’d try and mod it a bit so it flowed a little better.
The cockpit hatch doesn’t slide forward like the source, instead it flips up on a hinge. Rejoice! For there is room for a minifig Batman to sit in. But if the early pictures of the Keaton version of Batman are true, his molded cape will make it impossible for him to fit with it on. There’s no standing room at all,. You’ll have to take the cape off and on every time you put him in and out.
It features the same spinning flame out the back too.
The display stand allows you to turn the Batmobile to any desired viewing angle. Pretty neat. It can also sub in for a spin the bottle game in a pinch should you be lacking any bottles.
Even if you ignore for a second that this is a Batmobile based off a very iconic source material, as a standalone set, it’s just an okay Batmobile. But that’s not really the point of it, is it? The whole point of this sets existence is to be a companion piece to the big UCS one, 76139 1989 Batmobile. You get this one for free with the purchase of the big one starting tomorrow, Black Friday, while supplies last. You can build the big one and leave it on the shelf and still play with and recreate scenes from the movie with the little one to play. It doesn’t come with any minifigs for that exact reason. And thinking about it that way, it really is a nice execution of an idea and makes sense that its free. Otherwise, I can see LEGO charging $30 for it, same as 76119 with the minifigs it should obviously include, Batman and Joker.
Because of it’s lack of minifigs though, its really not worth getting on the aftermarket. The only real unique element is that sticker, but I’m sure some enterprising AFOL will offer replacement stickers somewhere at some point in the future. It’s great as a free set. But I don’t think I’d spend money on trying to get one.
Not gonna lie: this little promotional set was a big draw for me to want to buy the UCS one. But now that I have my sample pack, that scratch is itched. I’ve had some time to sit on it and think, and really reassess my feelings. I’m still trying to get rid of my LEGO, and it’s a real struggle at times. I’ve held off on major LEGO purchases for a long time now. Everything I get these days are for the kids. But this one may break me. I got my sample pack, but to be honest I still want to buy it tomorrow so I can get it again. I know, it sounds illogical, I can’t explain it, but it is what it is.
I’m giving this 5 stars. The model itself may have missed its mark but the score is based purely on the concept and execution. I wouldn’t suggest buying 76139 JUST to get 40433, you’d either have to be crazy or be me, but if 40433 interests you at all, try and get it this weekend starting tomorrow.
40433 1989 Batmobile Limited Edition is free with the purchase of the Ultimate Collector Series 76139 1989 Batmobile starting on Friday November 29th while supplies last from LEGO Shop@Home and LEGO Brand Retail locations.
All of the Pictures
As usual, FBTB may receive a small commission from any sales from clicks through our affiliate links in this post. And as always, we thank you for your continued support.
LEGO.com and Brand Retail locations are holding a special VIP weekend this weekend starting Saturday November 23rd through Sunday November 24th. During this weekend, VIP card holders can enjoy these special perks:
Double VIP: Earn double points on all purchases all weekend.
FREE exclusive Christmas Tree: Spend $120 or more to get the free Christmas tree model pictured above.
FREE Buildable 2×4 Red Brick: Spend $200 or more to get the free buildable 2×4 Red Brick with stand pictured below.
For VIPs only – 30% off: Select sets will go on sale for 30% off.
PRE-Black Friday
You know they mean business when they capitalize the “pre” in “pre-Black Friday”, right? Select sets will go on sale from Monday November 25th through Thursday November 28th. I’m going to take a wild guess and predict that the stuff on sale during PRE-Black Friday is the same stuff that’s on sale during VIP weekend without the requirement of being a VIP card holder.
Batmobiles Available On Black Friday
Let’s not forget about the main event, though. 76139 1989 Batmobile goes on sale on Black Friday, November 29th. Buy that for $249.99 and you can score yourself a special mini version of it for free while supplies last, which probably won’t last that long.
It’s going to be a very Batman Christmas as LEGO has officially unveiled the 1989 Batmobile sets. Yes, plural. The early pictures of 76139 1989 Batmobile didn’t do it any justice; neither did the pictures of the smaller 40433 1999 Batmobile – Limited Edition. I knew the release was imminent, and so here we are with the official announcement.
First up is the UCS model 76139 1989 Batmobile. Weighing in at 3,306 pieces, it’ll cost you $249.99 USD / $299.99 CA / £219.99 UK. It will be first available on Black Friday this year November 29th, 2019, at LEGO.com and LEGO Brand Retail locations. It features a rotating display stand so you can view and display it at just about any angle and a minifig stand to display Vicki Vale, Joker, and Batman.
The second Batmobile is 40433 1999 Batmobile – Limited Edition. This miniature replica of the bigger set is free with the purchase of said big set from November 29th through December 5th while supplies last. Wild guess here but supplies ain’t gonna last. I was a little off on my prediction.
I was trying really hard not to spend money on LEGO but the heart wants what it wants. And mine wants these.
All the pictures below including the press releases and videos.
76139 1989 Batmobile Pictures
40433 1999 Batmobile – Limited Edition
76139 1989 Batmobile Product Info
76139 1989 Batmobile Ages 16+. 3,306 pieces
US $249.99 – CA $299.99 – DE €249.99 – UK £219.99 – FR €249.99 – DK 1899DKK
*Euro pricing varies by country. Please visit shop.LEGO.com for regional pricing.
Build and proudly display a curvaceous LEGO® brick model of the iconic 1989 BatmobileTM!
BatmanTM fans and anyone who appreciates cool cars will love the LEGO® DC Batman 76139 1989 BatmobileTM model car kit for adults. This beautifully detailed LEGO brick building toy replicates the classic curves of the famous Batmobile car, as seen in the 1989 Batman movie. Measuring over 60cm long and built from 3,306 pieces, the model offers a challenging and rewarding build. Die-hard fans will love authentic features such as the slide-open cockpit with a new-for-November-2019 wraparound windshield element, 2 hidden machine guns with a pop-up function activated by turning the turbine exhaust, and decorative grappling hooks on each side of the vehicle. The Batman toy car comes with a rotating display stand (with an attached information plate with 1989 Batmobile statistics) for ease of viewing from any angle. A must-have for all Batman fans, this super-hero toy construction set also includes 3 new-for- November-2019 minifigures—Batman with a cape that matches his 1989 movie outfit, The JokerTM and Vicki ValeTM—plus a brick-built minifigure display stand.
This super-hero toy includes 3 new-for-November-2019 LEGO® minifigures: BatmanTM (new torso decoration), The JokerTM (new face and torso decoration) and Vicki ValeTM (new torso and legs), plus a brick-built minifigure display stand.
This LEGO® brick version of the 1989 BatmobileTM features a slide-open cockpit with a new-for- November-2019 wraparound windshield element, 2 minifigure seats, a steering wheel, stick shift and dashboard stickers, 2 hidden, non-shooting machine guns under the hood with a pop-up function activated by rotating the turbine exhaust, 2 decorative grappling hooks, wheel trims with the Bat logo and specially designed tires for the front wheels, batwings and other iconic design details.
This LEGO® set also includes a brick-built rotating display stand for the BatmanTM toy car with an attached information plate with 1989 BatmobileTM statistics.
Weapons include Batman’s Batarang and a gun and The Joker’s gun.
Accessories include Batman’s new-for-November-2019 cape that matches his 1989 movie outfit and Vicki Vale’s brick-built camera.
This LEGO® BatmanTM model car kit for adults includes over 3,300 pieces and makes a wonderful nostalgic holiday gift or birthday present for any Batman fan.
1989 BatmobileTM measures over 4†(12cm) high, 23†(60cm) long and 8†(22cm) wide.
76139 1989 Batmobile Official Press Release
PROTECT GOTHAM CITY IN THE ULTIMATE LEGO® 1989 BATMOBILETM
The LEGO Group announces the arrival of Batman’sTM 1989 Batmobile to celebrate the 30th anniversary of the Iconic film. Roaring into LEGO Retail Stores and LEGO.com from November 29th.
[November 7th, 2019] Celebrate the 30th anniversary of Tim Burton’s iconic Batman movie with the incredible 1989 BatmobileTM launching on Black Friday. The Batmobile comes packed full of authentic features from the classic 1989 movie.
The 1989 Batmobile is built from over 3,300 pieces, measuring over 23†(60cm) long and sits on a rotating display plate. The sleek design makes this set a highly rewarding build that is perfect for displaying at home. This LEGO set includes three new-for-2019 minifigures: Batman with a new and unique cape, The JokerTM, with a new face and torso decoration and Vicki ValeTM featuring a brand new torso and legs.
The 1989 Batmobile comes with a new-for-2019 wraparound windshield element and decorative grappling hooks on both sides of the vehicle. Place the Batman minifigure into the car by opening the slide-open cockpit before turning the car’s turbine exhaust to make the two machine guns hidden under the hood pop up. The Batmobile comes with detailed Bat emblems on the wheel trim and a set of specially designed tyres for the front wheels.
The 1989 Batmobile is launching as part of LEGO Black Friday events and those who purchase the set between November 29th and December 5th will receive an exclusive mini replica of the original model as a free gift available in limited quantities.
The 1989 Batmobile comes with a rotating display stand, with an attached information plate detailing the cars statistics for easy viewing and a brick built minifigure display stand for the three minifigures.
The 1989 BatmobileTM measures over 4†(12cm) high, 23†(60cm) long and 8†(22cm) wide.
LEGO 1989 Batmobile is available directly from LEGO stores and LEGO.com from November 29th.
Brickset reported that the UCS 1989 Batmobile was spotted at the Billund Airport by dylanchow on Instagram. It’s price was set at 1999 DKK, or €279.58. Similarly priced sets peg the 3,000+ piece set at $259.99 USD. It being spotted in the wild can only mean that the release is not too far off. I’m going to go out on a limb here and say December 1 for it’s release day. It would have been better if it were released on June 19th, 2019 instead, marking the exact 30th anniversary of one of the greatest Batman films of all time being released in theaters.
Still no word on the smaller-scale Limited Edition 1989 Batmobile one yet. But since I’m already out on the limb here, it’ll probably be free with a purchase of a DC Super Heroes set of…. $75 or more. /shrug Whatever the deal is, it can’t come fast enough.
I’m trying not to get excited here. Because a long time ago, right after I reviewed the UCS Tumbler, I put together a wish list of UCS Batmobiles that LEGO should make. The Keaton Batmobile from the 1989 Batman film, known as the ’89 Batmobile, was tops on that list. I was stoked when the as-of-yet-unannounced 40433 1989 Batmobile – Limited Edition was discovered. Never in a million years did I ever think that UCS one would be made, but here it is:
This is making the rounds on #legoleaks over at the ‘gram: 40433 1989 Batmobile – Limited Edition. No word yet about how one is to acquire such a set, but seeing as to how it’s marked ‘Limited Edition’, one can only guess. GWP maybe?
https://www.instagram.com/p/B29EErsjGQ5/
It also does not include this Keaton Batman. The Keaton fig will probably be part of the DC CMF series. What’s significant about this particular Batman minifig is that it seems to include a molded cape. The helmet, cape, and bat symbol are all one piece that fits over the head element.
https://www.instagram.com/p/B3Chl3eg0Xa/
If you explore that hash tag further, you can see pics of minifigs from what may or may not be a DC CMF series.
Download ’em while you can. No telling if and when LEGO’s going to get them pulled.
It may not be UCS, but I can scratch another Batmobile off my most wanted list.
When I first saw pictures of the new LEGO Batman sets, there was one set in particular that I thought was the best of the bunch. It’s this one right here: 76119 Batmobile: Pursuit of The Joker. So while I was at Comic Con a month and a half ago, I picked one up to help meet the minimum to buy me an exclusive set fully intending to do a review. And so here we are.
The Minifigs
76119 Batmobile: Pursuit of The Joker is as simple and uncomplicated as they come. In it you get Batman, Joker, and the Batmobile. Joker is donned in his classic comic book colors of purple and green. His head is double-sided and he carries a stud-shooting gun. It might seem ridiculous that he, alone with his gun, would go up against the Batmobile, but this is the Joker and he’s prone to antics like this.
Batman looks fine. He has a double-sided head where one side is Serious Batman and the other is Smirking Batman. He has back printing for his back six-pack and that newish style clothy cape. The printing on his front is a little too busy in my opinion, too detailed for a minifig. Half of those lines don’t even make any sense.
Bruce Wayne looks stupid as always. Way back in the day, when I first saw the Batman figure before it was released and how there was white printing on the forehead and how the eyes of the mask were set higher so that when it was put on you just see whites for eyes I thought it was genius. It gave Batman that comic book look, and still fit on a minifig. So at the time we just had to accept these weird printing spots on a minifig head. Putting a hair element on top sometimes hid the white spots but it never completely covered it, but it was passable.
Mind you when all of this was happening this was LONG before double-sided printing on a minifig had became the norm. But now that we have such luxuries to allow our minifigs to express themselves in more than one way, LEGO should have gone back to the drawing board on how to print Bruce Wayne’s head. One side should just be his face, and the other be a masked face where the white spots are lower where they should be, i.e. over the eyes. Clearly the steel mold used for the mask has been retooled otherwise we wouldn’t be getting these chinless ones like we do now. It seemed like a hugely missed opportunity to fix what I now think is the ugliest execution of a minifig. The heads are worthless by themselves and only make sense when used with a Batman mask. And now the face is printed on an all black head element to give the Batman that all-dark look (tangent: I wish they did this with TIE Fighter pilots. Having that little bit flesh peek out from under and especially the back of the helmet is jarring).
The Batmobile
Anyhoo, on to the real meat of this set. The Batmobile! This thing is long and hefty. You can definitely the weight and the value you get for your money.
Built all in black and very very very dark grey, it’s got the signature pair of fins in the back followed by a gigantic flame coming out the exhaust.
The fins are positionable in the all sorts of weird ways but they look best pulled all the back and tilted up against its slot barrier.
As far as play features, it’s got the standard, flip-foward, opening cockpit. I do wish they could figure out a sliding mechanism so the hatch can slide forward.
There are guns that flip up and down, one on each side.
There’s also a front flap to expose turbines for an added boost. Those are just printed 2×2 round tiles.
The giganto flame coming out of the exhaust is rigged up to the rear axles. Move The Batmobile forward and backward and the flame spins. Kinda neat.
Look familiar? Well, it should because this was the original model that 76119’s Batmobile was based on. This was released way, way back in 2006 when LEGO Batman was its own line. This was an original design by The LEGO Group, not based on a pre-existing rendition, and one that I wasn’t a huge fan of. 7784’s Batmobile served as the blue print to what we get in 76119: the big bat-shaped head on the front, the tilted fins in the back, spinning flame, the circular barrel-shaped things on the side, right down to the red seats:
You’d have to be blind, ignorant, and stubborn to not see the similarities.
Another picture from the top of the box shows off two features that are also present in the new System-scale set: flip up Bat-head with turbines behind it and Bat symbol hub caps.
The back of the 7784 box shows a few more features that couldn’t be replicated at the smaller scale, such as the gears and axles under the hood and the double flame exhaust. Still, you can see the relevant parts that were translated into the smaller model.
Is this LEGO being lazy? Absolutely, because rather try and design a new model, someone on the design team was told, “Here, make this smaller.” But despite that, the final product is just fine. Batman sets will never not include a villain and getting Joker included in this set is about as basic as a Batman experience in a box as you’ll get. At $29.99 MSRP, it won’t break the bank either and you would do well to pick up an extra or two to give as gifts for your kids’ friends who will eventually have birthday parties that you and your kid will be invited to.
The set is just fine and I can’t find any faults in it other than Bruce lamehead Wayne. Final score is a four out of five stars. I’m knocking it down a star for the stupid minifig head. Yes, it irks me that much.
Buy 76119 Batmobile: Pursuit of The Joker
Amazon has this set on sale for 17% off as of the time of this writing, just $24.99 (down from $29.99 regular MSRP).
Will It Fit In A Ziploc Freezer Bag?
Yes.
All Of The Pictures
Win My Review Copy
As per my usual fashion, I’m giving away my review copy of 76119 The Batmobile: Pursuit of The Joker. Want a chance to win it? Send an email to giveaways@fbtb.net with LAMEHEAD as the subject line and your complete mailing address in the body. Giveaway is subject to FBTB’s standard giveaway rules. The entry period is open from the time of publication until 11:59pm Pacific Time September 30th, 2019. Your prize may or may not include every one of the extra, leftover elements.
Good luck!
Help Keep The Lights On
Like the review? Consider helping FBTB keep the lights on by donating, becoming a subscriber, or shopping through one of our affiliate links. We get little support from LEGO these days so we rely on ads, affiliate fees, and donations to keep going. 100% of the money goes towards operational costs and set purchases for reviews, giveaways, and contest prizes. Thank you for your consideration.
And for the record, LEGO did NOT provide a review copy of this set.
I’ve been on vacation for the past two weeks and just got back into the swing of things this past Monday. But I’m back to blogging now and wanted to share my experiences at Comic Con starting with the LEGO exclusives. I’ve been chasing Comic Con exclusives for a long time and have been witness to all of LEGO’s different iterations of distribution ever since they got into the exclusives game. And long time readers of this blog will know that I’ve never been a fan and criticized their methods, some years more harshly than others. I’m not one to pull punches either and will always be honest in my opinion with them, their products, and their practices. So, know that when I say they got it right this year, I mean it.
How LEGO Improved Giving Away Exclusive Minifigs
This year, they brought the iPad game back after a 1-year hiatus (last year, they used Comic Con’s exclusives portal to handle distribution) and one of my biggest gripes in years prior was the time they would start that iPad game. It always started at 12:30, sometimes a few minutes earlier but not early enough to make any measurable difference. And that was a bad time because for anyone to have a chance at the game, they’d have to line up first thing in the morning. The line would get so long it would go down the back of the convention hall, run along the marina, and go past the Marriott hotel, even reaching as far as The Cheesecake Factory. Or so I’ve heard. If you found yourself in line anywhere near the Manchester Grand Hyatt, you’d have zero chance. And really, they should send people down there and give them a warning that if they’re that far back in line they probably won’t even have a chance to play the game. That’s just common decency and respecting your fan base.
‘X’ marks the spot. The further away you were from that, the longer it would take and the less likely you were to have a chance to win.
But back to the starting time. Like I said, having it start at 12:30pm was bad. You’d waste half the day waiting in line and you’ll most likely miss out on getting other exclusives or even attending a panel or two. It didn’t matter to LEGO, they weren’t the ones in line. They’d mosey on up there, set up their iPads and let the line run through.
This year LEGO started processing the line in the morning. The scheduled time was 9:30am but they started as early as, I want to say, 8:15am. This was TONS better because as soon as you were done you’d still have time to get in line to get into the convention hall and have a shot at getting other exclusives. You’d also still have the option of attending a panel or two or attend some other event. It was liberating in a way. I did not find myself questioning my life choices or getting burned to a crisp waiting outside in the sun for hours on end.
Another welcome change was that they tweaked the win-loss ratio of their iPad game. A little birdie told me that it was tweaked to around 80-20 instead of what it was before at about 60-40 or 50/50. While I do like those odds way better, first come first served is still, I think, a better method. Waiting in line for a couple of hours just to lose and walk away with nothing? Still disheartening, but even more so now if you fell into that 20%.
How LEGO Improved Selling Exclusive Retail Sets
This is the second year in a row that Comic Con ran the most popular exclusives through their portal. Registered and confirmed attendees were given a set number of tickets each day, and they can enter any number of raffles with those tickets. Those who were willing to forego everything else to get in line for one in previous years now found themselves with the same chances as every one else trying to make a buck and/or nab an exclusive. That’s the good and bad of it in a nutshell.
Obviously, there are pros and cons to this approach but I’d like to think of it as having more benefits than detriments. mos_eisley still disagrees with me. With this raffle system there’s way less line waiting. If you win, you get a specific time slot to go pick up your set. If you don’t win, it’s one less thing you have to do giving you more time to do something else. And if you completely missed out, you still had a chance to still get them all.
On Sunday, there was a fair amount of leftover sets from people failing to pick up them up on their assigned days. Leading up to Sunday, it was up in the air as to how one could acquire them but I found out that morning that anyone purchasing at least $50 worth of LEGO would have the opportunity to buy one of the leftover sets. I thought that was a great idea, completely fair, and a win-win for everyone. It’s not too much money to put out on top of the cost of the exclusive, you get some more LEGO out of it, and the retail booth (operated by LEGOLAND California) makes some additional money. Win win for everybody.
How LEGO Can Still Improve
First thing I’d do is not bag the exclusive figures. This year, LEGO decided to bag up every single minifig and hand off the bags to winners of their iPad game. This point of this suggestion isn’t so much a quality of life issue for attendees, but for the poor soul(s) who had to sit there, bag up each exclusive, and then arrange them neatly back into a box.
Second thing I’d do is get rid of the retail booth. A friend brought up this point and it’s something I completely agree with. It takes up space that can be dedicated to more of booth activities. LEGO’s booth foot print is divided up between an activities space and the retail space, about a 70-30 split respectively. This year it seemed more crowded than ever on the activities side. They should stop selling sets, and just have a window where people can come by to purchase their exclusive set and that’s it. Maybe a keychain or two, or a small polybag. Everything they sell that isn’t the exclusive can be bought online and shipped for free. I’d be interested to see what kind of sales numbers they pull during the weekend vs. the cost of paying for staff and logistics.
Conclusion
They’ve addressed every major issue I’ve complained about in the past (the late start times and low win-loss ratio). There are a few minor ones that could be improved upon still but this is a start. Before, it felt like making changes to improve the processes moved at a glacial pace. This year, the process felt so polished and went so smoothly, it’s a wonder why it was never implemented like this before. It could be because half of the exclusives, the retail sets, were handled by Comic Con’s exclusives portal. It could also be because there’s a new crew in charge; I didn’t recognize anyone running the distributions or manning the booth as from years past.
Except for that one guy from LEGOLAND that sells multiples of all of the exclusives and throws in extras and extras of all of the minifigs to the guy from Skybound every year. I recognized that guy. He was still there.
Today is Saturday, the day the con will be the most crowded. And unlike the previous two days, there is a LEGO-related panel that might be of interest:
New LEGO Content Releases
11:15am – 12:15pm
Room 6A
Go behind the scenes and get a sneak peek of upcoming LEGO animation. Jason Cosler (LEGO producer) and Robert May (LEGO producer) will be sharing exciting new LEGO animated content and hold a Q&A session moderated by Joshua and John Hanlon (Beyond the Brick).
Today is also the last day for the LEGO exclusive minifigure giveaway and today it’s going to be Zebra Batman.
And to complete the DC-centric LEGO exclusives, today is the day you can pick up the retail exclusive, 77903 The Dark Knight of Gotham City, if you are a confirmed winner in the exclusives portal. Be sure to bring your QR code!