Travel the dunes with the LEGO� Star Wars™ Ultimate Collector Series Sancrawler™

FBTB - From Bricks To Bothans

Follow us: RSS
News? Questions? Comments? Email!

Review: 75038 Jedi Interceptor

The official Lego set review forum. Please read the Guidelines before posting!

Review: 75038 Jedi Interceptor

Postby Staff » Thu Feb 27, 2014 7:38 am

75038 - Full Set

Quick, what's yellow, flies, and is a totally unneeded re-release? Okay, I'm sure there are more than a few smart... um, alecks... that probably yelled "Naboo Starfighter!" at their monitor (and at least one who had to be different and said something about a lemon catapult), but for the rest of us, it's Anakin's Jedi Starfighter, I mean, Interceptor. I suppose that's technically correct (the best kind of correct), as these ships are based on the Eta-2 Interceptor, but it makes finding them difficult when searching because all of them except this one and the green one before it are called Jedi Starfighters.

That green one is really the big problem with this particular release, though, as you can still find them on a few shelves and it was just retired a couple of months ago. It was a Target Exclusive, which made it a little harder to find, but wasn't exactly a knockout set by itself. To be fair, this version is nine years past when the original was made, and the Eta-2 fighters haven't been the weeds that the Delta varieties have been, but still, it feels like they could do something else (like that Obi-Wan's version, or maybe make the Hyperspace ring again).

At $25 and 223 parts, this is basically the new "budget" level set. It's also a crowded price-point in the early releases, with Grievous' Wheel Bike, the V-Wing Starfighter, and the Droid Fighter all in the lineup and running the same amount. I guess $25 is the new $20. The original included a Droid Fighter and Anakin's fighter in just 202 parts, so obviously there have been some updates done. So the real question is how does this live up as a re-release of that set?



I'll be honest, I had some negative expectations of this set going in, mostly because it just gets tiring to keep seeing the same rehash again and again and again. While the last version of the Delta-7 was my favorite and an overall a great build, we've pretty much had continuous versions of a Jedi Starfighter (either the Delta-7 or Eta2) since Episode II sets dropped years ago. I understand that Lego has a re-release schedule to go with turnover as kids age in and out of their target market... but a new version every year seems very quick to me.

75038 - Minifigs

For minifigs, we the two that belong in the set from the opening battle of Episode III: Anakin Skywalker and R2-D2. Both are new figures, or at least a mix of some new parts.

 75038 - Anakin 75038 - Anakin Back


Anakin is basically the same as the version that came with the green Interceptor, just with a different head. I still like the printing he gets on this, and the face looks a bit better... assuming you can ignore all of the gratuitous lines around the face. I'm not sure which ones are cheeks, which are scars, which are frowns, and which are smears from his lunch.

75038 - Anakin alt-face

We do get an alt face with a little bit of a smile, as well as the headset. That's probably the worst feature, since it reintroduces the same problem that we had with Anakin in the original Episode III sets. The only version without a headset was in the terrible Ultimate Lightsaber Battle set. Now, we get the Sith face in his other Jedi Interceptor, or a regular Episode III face / Sith Face that's in that terrible Palpetine's Arrest set. Some serious déjà vu going on.

75038 - Anakin Comparison

The upgrade is pretty obvious over a nine-year-old Episode III figure, which isn't all that surprising. Figures have undergone a couple of stylistic transformations since then. I like the belt printing on the new one and the tunic printing on the old one (and printed legs always beat plain ones), so I suppose the new one wins out.

 75038 - R2-D2 75038 - R2-D2 Back


The real surprise of this set has got to be a brand-new R2-D2 figure. This one managed to sneak in past pretty much everyone, including Don, who saw the set displayed at Toy Fair (well, saw it in Ace's pictures). If you can sneak a new R2 minifig past Don, you've accomplished something.

75038 - R2-D2 Posed

The printing certainly looks sharper, and the shiny silver looks better than the white and grey of previous versions. The one big knock is that they still haven't fixed the general problem that the dome printing is still too high up. To paraphrase Don when I pointed out the new figure... "move the band down to the edge and then all of the printing down for the rest of it.

75038 - R2s

This is the fourth revision we've had of R2, for the most part, and the first real change to the torso in... ever. The torso printing on the new one is just fantastic by comparison, and brings out a lot more of the detail from a distance. I look forward to seeing this version show up in future sets. Of course, none of those future sets are slated for later this year, so if you want the new R2, this is the set you need to grab.

75038 - Eta2 Side

Okay, yes, I cheated on the picture at the top and used a clear bar/gun to hold it up. It just looks cooler that way. This, however, is how it looks if you don't do something to raise it up. A lot of the PT ship designs look great in flying mode and somewhat lame when you fold it up to land (the new V-Wing has a similar issue).

75038 - Eta2 Open

The interior has actually gotten a bit of an upgrade, trading out the control-stick of previous versions for a stickered 2x4 tile with controls. I'm not sure how I really feel about this. As a sticker, it has some use, but it feels sort of lazy as a solution to how boring the interiors of these starfighters usually are. This version also features the same astromech slot that Anakin's green interceptor included, which I expect would be a regular feature in these ships going forward.

75038 - Eta2 Underside

The underside of the wings is where the majority of the parts upgrade really comes in. We get the new flick-fire missiles, which integrate in pretty nicely. I know I've been hard on flick-fires in the past, but I like these as a solution, since it takes away the need to build the elaborate firing mechanisms that so many sets have wasted parts on. Now we just get two 1x4 flick-fire bricks and parts can go into more important things.

75038 - Anakins Eta2 Comparison

The difference between this and the original doesn't really come across in the pictures. There are obviously more parts in the new one, and the wing is a couple of studs wider, but the real difference is that the old one is just a fragile sloppy mess. Sure, there are a lot more parts to choose from, but the old one was an exceptionally bad build in a whole sub-theme of bad builds. For those who didn't get the original run of Episode III sets, they were probably some of the worst overall releases there were. The original Clone Turbo Tank was nice, but there were some real stinkers in there, like the Wookiee sets, Ultimate Starfighter Battle and Ultimate Lightsaber Battle.

75038 - Current Eta2 Comparison

The difference between the green version and this one is far more subtle. There are a few part differences, but the overall bulk and feel is pretty close together. Unless you're a completionist or really want the yellow version, if you own the previous Jedi Interceptor there's not that much reason to jump to this one (other than R2).

75038 - Eta2 Comparison

There are actually five Eta-2 Jedi Starfighters at this point... that accursed red Obi-Wan's Jedi Starfighter is one of my set regrets. Luckily, the upcoming release of the Jedi Scout Fighter finally give me a way to pick up the wings/flags in the right color without spending a fortune. I'm thinking I'll just MOC up one of the newer designs instead of trying to redo the old one at this point. I also never realized that the cockpit glass had changed from dark to light gray at some point, but hey, it did.

In the end, this set isn't nearly as bad as it probably could have been. In one sense, it's a very good upgrade to the original Anakin's Jedi Starfighter. But in another, it's a set that's very similar to one that just retired, and there are a lot more sets in the price range just begging for your money. A bit cheaper, and this set is a good by, but hard to justify at full price. That being said, if you missed the earlier Jedi Interceptors, you have your chance... again.

What I liked

  • A vastly better version of Anakin's starfighter than the original; those extra parts were put to good use

  • New flick-fires are a nice upgrade over the old, and often over-complicated, mechanisms

  • New R2-D2 is a pretty sharp and unexpected upgrade


What I didn't like

  • Feels more like a $20 set than a $25 set

  • Anakin's headset is printed on both versions, meaning you have to buy a bad set (Palpetine's Arrest) to get a regular Episode III Anakin

  • Jedi Starfighter fatigue is in full force


Verdict: 3 of 5. It's not a terrible set, and to be fair, is massively better than the original, and a new R2-D2 adds a bit. On sale (say in the $20 range) this is a fine set... I just really wish they'd make an Obi-Wan's Starfighter version in dark red.

You can order 75038 Jedi Interceptor on Amazon.com right now. This set and the rest of the early-2014 lineup release on March 1st.

75038 Box Art
---
Permalink: http://www.fbtb.net/2014/02/27/review-75038-jedi-interceptor/
Staff
 
Posts: 1
Joined: Fri Feb 13, 2009 8:19 pm

Re: Review: 75038 Jedi Interceptor

Postby rushiosan » Thu Feb 27, 2014 8:06 am

I'd rather pay $40 for both Anakin and Obi Wan's starfighter pack than just a yellow thing for $25. I already have the green version and I must admit this wasn't actually improved in any way. We have the control panel which's a decent add-on, but it's instantly killed by the new (ugly as hell) flick-fires under the cockpit. The old place (opposite to R2's slot) is now empty with the feel we walked a step back. Even the cockpit area and lightsaber storage wasn't touched. That was the biggest flaw with the green version. You couldn't fit any other Jedi inside of it because there was no room for rotating the minifig a little bit. Remember Saesee Tiin's fighter? Yeah, that clip under the wing was a great solution.

Personally, the #9494 is among the best small SW sets that I ever had. It has everything. Nice figures that suit the scene (not completely random guys like we've seen in some 2013 sets), two lava droids, the best ETA-2 design so far. I don't see a reason to pick #75038 until #9494 is completely wiped out from stores.
rushiosan
 
Posts: 80
Joined: Sat Oct 20, 2012 9:42 am

Re: Review: 75038 Jedi Interceptor

Postby Trooper10 » Thu Feb 27, 2014 9:42 am

... that accursed red Obi-Wan's Jedi Starfighter is one of my set regrets. Luckily, the upcoming release of the Jedi Scout Fighter finally give me a way to pick up the wings/flags in the right color without spending a fortune. I'm thinking I'll just MOC up one of the newer designs instead of trying to redo the old one at this point.

Yes, yes - I've done that with my current Obi-Wan Eta2 (I took a cheap 9494 de-minifiged set from Ebay) and swapped out green for red. Dark red will be a lot nicer.

Image
Obi Wan's Jedi Interceptor by Trooper10.0, on Flickr
Trooper10
 
Posts: 180
Joined: Sun Mar 20, 2011 2:58 am

Re: Review: 75038 Jedi Interceptor

Postby dWhisper » Thu Feb 27, 2014 10:38 am

I would have paid $50 for a pack with both of them and perhaps a couple of buzz droids, because that'd be unique. I quite like 9494 as well (I linked the review in the opening), which is why I was a bit harder on this one. As an upgrade to the original Anakin's Starfighter, it's great. But yeah, it''s not as good as 9494 was.
If the above post didn't offend you, you're probably reading it wrong.
dWhisper
 
Posts: 24
Joined: Fri Jan 16, 2009 10:56 pm
Location: The Arkansas Wasteland

Re: Review: 75038 Jedi Interceptor

Postby Zrath » Thu Feb 27, 2014 2:26 pm

The Lego Group really needs to make a new version of Obi-Wan's red interceptor.
They only ever made one, as part of the Ultimate Space Battle set!
They made a blue one with a Hyperdrive Booster Ring, but that doesn't count.
Lego keeps remaking this yellow one. It's nice and the new R2D2 is a surprise bonus, but enough already!
Zrath
 
Posts: 52
Joined: Tue Nov 24, 2009 10:25 am
Location: Los Angeles, CA

Re: Review: 75038 Jedi Interceptor

Postby Joedward » Thu Feb 27, 2014 3:29 pm

How come these sets aren't hitting the States until march when they're been on sale most of everywhere else since the beginning of the year?
Is it just some trade off because you guys only pay about half of what the rest of us do, or is there some actual business orientated idea behind it all?
~Ed
(that's Mr. Ed to you)

(T!!!!!!!T=:|[\########################################
Joedward
 
Posts: 434
Joined: Tue Feb 10, 2009 6:30 am

Re: Review: 75038 Jedi Interceptor

Postby dWhisper » Thu Feb 27, 2014 3:42 pm

In retail, they've been hitting as soon as the reset has happened in most stores, so they've been available some places for a few weeks now. As for the reason for them being later officially, I'd guess it has more to do with sales planning and not wanting to step on the sales of stuff related to The Lego Movie. That's been a huge push here, so it's probably just a matter of them not wanting to undermine their own stuff.
If the above post didn't offend you, you're probably reading it wrong.
dWhisper
 
Posts: 24
Joined: Fri Jan 16, 2009 10:56 pm
Location: The Arkansas Wasteland

Re: Review: 75038 Jedi Interceptor

Postby banthafodder » Thu Feb 27, 2014 3:43 pm

The sets have been out here for a couple of weeks now. I think they delayed the release because of The Lego Movie so you would spend all of your money on the movie sets......it worked.
banthafodder
 
Posts: 682
Joined: Sat Feb 21, 2009 9:38 pm

Re: Review: 75038 Jedi Interceptor

Postby Trooper10 » Thu Feb 27, 2014 8:25 pm

Suckers aren't counting on the fact that I'm holding off for the freebie Martian Manhunter in March...HA! That's at least $75 that they won't get out me for another few days....hahahaaaaa
Trooper10
 
Posts: 180
Joined: Sun Mar 20, 2011 2:58 am

Re: Review: 75038 Jedi Interceptor

Postby rushiosan » Fri Feb 28, 2014 3:50 pm

Zrath wrote:The Lego Group really needs to make a new version of Obi-Wan's red interceptor.
They only ever made one, as part of the Ultimate Space Battle set!
They made a blue one with a Hyperdrive Booster Ring, but that doesn't count.
Lego keeps remaking this yellow one. It's nice and the new R2D2 is a surprise bonus, but enough already!


The Ultimate Space Battle is a hell of a rare set everywhere. It's cheaper to bricklink the parts and make a custom if you really want a red ETA-2...
rushiosan
 
Posts: 80
Joined: Sat Oct 20, 2012 9:42 am

Re: Review: 75038 Jedi Interceptor

Postby dWhisper » Fri Feb 28, 2014 4:14 pm

It was a limited release set in the first place, and a rather unpopular one at that. It's not as low rated as Ultimate Lightsaber Battle, but those two sets are peas in the pod for a bad era in sets. The real issue with the aftermarket (like I touched on in the review, but I don't like to point out specific sites for things in the reviews) had been the dark red flags. I checked last week, and they averaged between $5-8, and you need four. You can do the sub that Trooper10 did and use grey, or get them in red or grey quite cheaply. Stickers you can sub in from the other starfighters as well. But if you want the dark red, it's expensive.

Or wait for the Summer sets, when they show up on the Scout Fighter. That's my plan.
If the above post didn't offend you, you're probably reading it wrong.
dWhisper
 
Posts: 24
Joined: Fri Jan 16, 2009 10:56 pm
Location: The Arkansas Wasteland

Re: Review: 75038 Jedi Interceptor

Postby RfAurora » Fri Mar 07, 2014 2:49 pm

I picked this set up today while I was in town. I have to say that I like how sturdy this one is, and that I might get the green one. I definitely agree with others about getting the new Jedi Scout Fighter and using its dark red parts to make a new version of Obi-Wan's starfighter. I am also considering redoing the blue one with the hyperdrive ring in this style, and maybe a new docking connector.
RfAurora
 
Posts: 142
Joined: Thu Sep 17, 2009 7:17 pm


Return to Reviews

Who is online

Users browsing this forum: Yahoo [Bot] and 2 guests